Professionally installing microcement typically costs between £80 and £140 per square metre (+ VAT). However, because the installation is a highly technical, multi-day layering process, some specialist contractors apply a minimum project charge of £3,200 to £5,000 for smaller spaces under 15–20m².
Cost Breakdown by Project Type
The complexity of the space, waterproofing requirements, and necessary substrate preparation will shift your total per-square-metre rate:
| Project Type | Typical Price Range (per m²) | Key Cost Drivers |
|---|---|---|
| Standard Floor | £85 – £120 | Clean, level substrate with minimal prep work. |
| Decorative Wall | £90 – £130 | Access, complexity of the desired plaster finish. |
| Floor needing repair | £100 – £140 | Leveling compounds, crack stitching, or fiber mesh. |
| Bathroom / Wet Room | £120 – £180 | Tanking membranes, slip-resistance, tight fixtures. |
Why is the Installation Cost High?
- Labor Intensity: The material itself costs roughly £40 to £50 per m². The remaining balance goes toward meticulous labor.
- Multi-Stage Process: Microcement cannot be poured. Installers must hand-apply 5 to 7 individual layers—including primers, fiberglass mesh, base coats, finish coats, and specialized sealants—with curing and sanding intervals over 4 to 7 days.
- Fixed Setup Fees: Because a crew must visit the site daily to apply sequential layers, doing a small 4m² cloakroom requires nearly the same travel and setup time as a large 40m² kitchen floor. This is why small areas carry a massive per-metre premium.
How Much Does Microcement Installation Cost?
All prices are an approximate cost due to different prices charged around the United Kingdom.
