Epoxy Smooth Flow 5L

New product

A self smoothing, hygienic, ultra glossy epoxy floor coating laid at 2-4mm thick, just mix and pour for a seamless showroom standard floor

Excellent abrasion, wear and chemical resistance. Ideal for residential, industrial or commercial floors, food & beverage production areas. hospitals, garages, laboratories, showrooms, schools and plant rooms.

  • Hygienic – easy to keep clean
  • Smooth glossy finish
  • Extremely hard wearing with good abrasion resistance
  • Good oil and chemical resistance
  • 100% solids epoxy formula
  • Solvent free and virtually odourless

More details

In Stock

£ 120.00 tax excl.

More info

Epoxy Smooth Flow a self smoothing, hygienic, ultra glossy epoxy floor coating laid at 2-4mm thick, just mix and pour for a seamless showroom standard floor

Epoxy Smooth Flow has excellent abrasion, wear and chemical resistance. Ideal for residential, industrial or commercial floors, food & beverage production areas. hospitals, garages, laboratories, showrooms, schools and plant rooms.

  • Hygienic – easy to keep clean
  • Smooth glossy finish
  • Extremely hard wearing with good abrasion resistance
  • Good oil and chemical resistance
  • 100% solids epoxy formula
  • Solvent free and virtually odourless

 

Specifications

  Surfaces   concrete, wood or metal
  Interior/Exterior   interior
  Curing time   at 20°C the area can be opened to light traffic after 24 hours
  Primer required?   very porous surfaces should be sealed with Epoxy Prime 100 before pouring the resin
  Coverage   1kg of the mixed product will cover 1m²@ 1mm thick
  Pot Life   40 minutes
  Shelf life   one year in sealed containers

Surface Preparation

In all cases surfaces should be clean, dry, sound and free from any oil or contaminants. Thorough preparation is required to ensure maximum performance. Concrete should ideally be mechanically abraded to remove surface laitance. If this is not possible the surface should be treated with Acid Etch Cleaner and allowed to thoroughly dry before coating. Grease or oil should be removed with Master Bio Clean and the area washed off and allowed to dry. New concrete should be at least 28 days old with a moisture content of less than 6%.

Mixing Epoxy Smooth Flow

Mix the two components individually. Pour the smaller container into the larger and thoroughly mix for 3-5 minutes using an electric drill and mixing paddle, or wide bladed tool, working around the sides and base so all liquid is incorporated to ensure thorough and complete mixing. Once the product is an even consistency and uniform colour decant into a shallow tray ready for application.

Application

Best results are obtained in ambient temperatures of 15°C or above. Pour the mixed Smooth Flow on to the prepared surface and spread evenly to the desired depth of 2-4mm using a notched squeegee. Within approximately 5-10 minutes, apply a spiked roller to remove air bubbles and repeat a few minutes later and thereafter until the air bubbles have gone.

 

9 other products in the same category: